The Shelf Testing Report summarises how each product on a Virtual Shelf performed in your study. It ranks products with a composite Score, shows the shelf-wide benchmarks and a shopper funnel, and highlights nine Key Findings spotlight cards. This article explains how each number is calculated and what to do with it.
Interactive explorer
Use the explorer below to test the Score formula and to inspect each Key Findings card. The controls work without leaving the page.
Interactive simulator
Interactive Score Calculator
Change the inputs to see how the composite Score is built. Use the presets to test typical shelf archetypes.
Composite Product Score
0.0 / 100.0
Custom values
Active formula
- Purchase: +0.0 pt
- Pickup: +0.0 pt
- Measured VAI: +0.0 pt
- Predicted CAS: +0.0 pt
Shelf Diagnosis
Shelf blind spot: shoppers rarely look at this product (Measured VAI below 15). Move it to a higher-visibility position or review pack contrast.
Attention trap: the product gets noticed, but purchase intent lags its Measured VAI by 25 points or more. Test price and call-to-action cues on the pack.
Hidden gem: purchase intent is at least 10 points above Measured VAI. Keep the pack and price that convert, and consider more visibility.
Strong top-tier performer: Score is 50 or higher. Use it as a benchmark for the rest of the shelf.
Balanced performer: Score is between 15 and 50. Improve the weakest input to move up the ranking.
Needs work: Score is below 15. Review placement, pack design and price together.
9 spotlight cards
Key Findings Card Explorer
Select a card to see what it means, how RealEye selects the product and what to do next.
1st, 2nd & 3rd place
Top Score Podium1st: "Best overall composite score on this shelf." 2nd: "Strong runner-up across purchase, pickup and attention." 3rd: "Solid contender — in the upper tier of shelf performers."
- Why is it called this?
- The podium spotlights the three products with the highest composite Score on this shelf. It is the quickest way to see the leaders.
- How RealEye selects this product
- Products are sorted from highest to lowest Score. Ties are broken by Purchase ratio, then Pickup ratio, then Measured VAI.
- Example on a real shelf
- Product A has 12% Purchase, 17% Pickup and Measured VAI 32.6, so its Score is 16.3 out of 100. If it ranks first, it appears in the 1st place card.
- What action to take
- Use 1st place as the benchmark. Compare 2nd and 3rd place to find which input separates them.
Hidden gem
High Buy vs ReachConverts better than its reach alone would suggest.
- Why is it called this?
- A hidden gem has a Purchase ratio well above its Reach. Few shoppers look at it first, but those who do are likely to buy.
- How RealEye selects this product
- The product with the largest positive gap of Purchase ratio minus VAI Reach. The Purchase ratio must be above zero.
- Example on a real shelf
- A product with 20% Purchase ratio and 8% VAI Reach ranks above a product with 15% Purchase ratio and 14% VAI Reach, because its gap is larger.
- What action to take
- Find out what drives the purchase (pack, price, placement). Protect those elements and test whether more visibility lifts results further.
Attention trap
High Reach vs Low BuyGets noticed, but cart intent lags behind the attention it receives.
- Why is it called this?
- An attention trap pulls many eyes but few shoppers add it to the cart. The shelf looks busy at this product and then passes it by.
- How RealEye selects this product
- The product with the largest positive gap of VAI Reach minus Purchase ratio. The VAI Reach must be above zero.
- Example on a real shelf
- A product with 60% VAI Reach and 3% Purchase ratio is selected over one with 30% VAI Reach and 2% Purchase ratio.
- What action to take
- Check the pack message, price cue and call to action. Attention is already there, so the gap is usually in the message or the price.
Impulse King
Fastest PickupShortest time from first look to pickup — grabs attention and triggers action fastest.
- Why is it called this?
- The Impulse King is picked up fastest after it is first seen. It turns a glance into an action with the least delay.
- How RealEye selects this product
- The product with the lowest average time from first seeing it to picking it up.
- Example on a real shelf
- If product B is picked up on average 1.8 seconds after it is seen and no other product is faster, product B is the Impulse King.
- What action to take
- Keep the visual cues that make the product easy to spot and pick up, and reuse them on other packs.
Obvious choice
Top Buy PickupMost common first pickup that ended in purchase — instant buy appeal.
- Why is it called this?
- The obvious choice is the product that most often gets picked up first and is then bought. It is the default choice on the shelf.
- How RealEye selects this product
- Among participants whose first pickup ended in a purchase, the product picked up first most often.
- Example on a real shelf
- If 9 of 20 buyers picked up product C first, product C is the obvious choice.
- What action to take
- Use it as the reference for what the shopper expects. Keep its packaging and placement consistent with the category standard.
Shelf blind spot
Lowest AttentionLowest attention ratio — shoppers' eyes skip over this product most.
- Why is it called this?
- A blind spot is a product that shoppers' eyes skip. Even good products cannot sell if no one looks at them.
- How RealEye selects this product
- The product with the lowest attention ratio on the shelf.
- Example on a real shelf
- A product with an attention ratio of 4% is selected over one with 12%.
- What action to take
- Review the placement first (eye level, neighbours, shelf edge). Then check whether the pack colour and contrast stand out.
Negative choice
Picked, Not BoughtMost common first pickup that was put back — grabs but doesn't convert.
- Why is it called this?
- The negative choice is picked up first often but then put back. It creates interest that does not turn into a sale.
- How RealEye selects this product
- Among participants whose first pickup ended without a purchase, the product picked up first most often.
- Example on a real shelf
- If 7 of 20 non-buyers picked up product D first and put it back, product D is the negative choice.
- What action to take
- Look at the price, the claims and the pack information. Something in the detail is making shoppers reconsider.
Worst performer
Lowest ScoreLowest composite score — needs shelf placement or pack review.
- Why is it called this?
- The worst performer has the lowest composite Score among the products on the shelf.
- How RealEye selects this product
- The last product when all products are sorted by Score, using the same tie-breakers as the podium.
- Example on a real shelf
- If the lowest Score on the shelf is 4.3, that product is the worst performer.
- What action to take
- Start with the lowest input (Purchase, Pickup or Measured VAI) and decide whether to fix the placement or the pack.
AI Pack Winner
Top Predicted CASHighest Predicted Composite Attention Share (CAS) in the current comparison set, predicted from AI analysis of pack design.
- Why is it called this?
- The AI Pack Winner is the product that the AI pack analysis expects to draw the largest share of attention in this comparison set. It is a prediction, not a measurement.
- How RealEye selects this product
- The product with the highest Predicted CAS among the products that were enriched with AI prediction. The card shows "Not enough data yet" when no product qualifies.
- Example on a real shelf
- With products E (CAS 41) and F (CAS 22) analyzed together, product E is the AI Pack Winner.
- What action to take
- Compare the prediction with the measured VAI. Use the AI winner to shortlist pack variants, then confirm with a real study.
Overview
A Virtual Shelf study shows participants a shelf of products. The Shelf Testing Report turns the recorded behaviour into:
- one composite Score (0 to 100) per product, used to rank the shelf;
- the input metrics behind the Score: Purchase ratio, Pickup ratio and Measured VAI;
- optional Predicted CAS, an AI estimate of attention based on pack design;
- nine Key Findings cards that point to products worth a closer look;
- shelf-wide benchmarks, a shopper funnel, an interactive shelf map and a product leaderboard.
Full reference tables
The tables in this section and in the Key Findings section are the reference for the formulas and the spotlight cards.
Methodology and Overall Score
The Score is a weighted sum of the input metrics. There are two formula modes: the Default Score, and the Score with Predicted CAS, which adds Predicted CAS as a fourth input.
| Formula mode | Equation | Weights |
|---|---|---|
| Default Score | Score = 0.60 × Purchase ratio + 0.25 × Pickup ratio + 0.15 × Measured VAI | 60% / 25% / 15% |
| Score with Predicted CAS | Score = 0.50 × Purchase ratio + 0.20 × Pickup ratio + 0.15 × Measured VAI + 0.15 × Predicted CAS | 50% / 20% / 15% / 15% |
Each input is a percentage or a 0 to 100 value, so the Score is also on a 0 to 100 scale. The Score is rounded to one decimal place.
Ranking and tie-breaking
Products are sorted from highest to lowest Score. When two products have the same Score, the report breaks the tie in this order:
- Purchase ratio (higher first)
- Pickup ratio (higher first)
- Measured VAI (higher first)
Input Metrics Defined
Purchase ratio is the share of participants who added the product to the cart. It is the strongest driver of the Default Score (60%).
Pickup ratio is the share of participants who picked the product up from the shelf. It carries 25% of the Default Score.
Measured VAI (Visual Attention Index) is the attention a product received during the study. It is the average of three equal thirds of the VAI components: VAI Reach, VAI Speed and VAI Hold. Each third contributes equally, so Measured VAI is the mean of the three values. It carries 15% of the Score in both modes.
Predicted CAS (Composite Attention Share) is an AI-predicted attention estimate for each product, based on analysis of its pack design. It is not measured from participants. It only enters the Score in the Score with Predicted CAS mode (15%). Read more in Shelf Report Predicted Attention.
For how Areas of Interest are defined and used to measure attention, see Areas of Interest (AOIs).
Key Findings Cards Explained
The Key Findings section highlights products that stand out for a specific reason. Each card is one spotlight. If no product qualifies for a card, the card shows Not enough data yet.
| # | Card | Badge | What it highlights |
|---|---|---|---|
| 1 | 1st, 2nd & 3rd place | Top Score Podium | The three highest Scores on the shelf |
| 2 | Hidden gem | High Buy vs Reach | Products that convert better than their reach suggests |
| 3 | Attention trap | High Reach vs Low Buy | Products that get noticed but are rarely bought |
| 4 | Impulse King | Fastest Pickup | Products picked up soonest after they are first seen |
| 5 | Obvious choice | Top Buy Pickup | The product most often picked up first by buyers |
| 6 | Shelf blind spot | Lowest Attention | The product with the lowest attention ratio |
| 7 | Negative choice | Picked, Not Bought | The product most often picked up first by non-buyers |
| 8 | Worst performer | Lowest Score | The product with the lowest composite Score |
| 9 | AI Pack Winner | Top Predicted CAS | The product with the highest Predicted CAS |
1st, 2nd & 3rd place
The podium lists the top three products by composite Score. It is the fastest way to see the leaders on the shelf.
- Why is it called this? The podium spotlights the three highest Scores on the shelf.
- How RealEye selects this product: Products are sorted from highest to lowest Score, with the tie-breaking order described above.
- Example on a real shelf: Product A has a Purchase ratio of 12%, a Pickup ratio of 17% and a Measured VAI of 32.6. Its Score is 16.3 out of 100.
- What action to take: Use 1st place as the benchmark. Compare 2nd and 3rd place to see which input separates them.
Hidden gem
A hidden gem has a Purchase ratio well above its VAI Reach. Few shoppers look at it first, but the ones who do are likely to buy.
- Why is it called this? It is hidden because it gets little attention, yet it converts well.
- How RealEye selects this product: The product with the largest positive gap of Purchase ratio minus VAI Reach. Its Purchase ratio must be above zero.
- Example on a real shelf: A product with a 20% Purchase ratio and 8% VAI Reach ranks above one with 15% Purchase ratio and 14% VAI Reach, because its gap is larger.
- What action to take: Find out what drives the purchase (pack, price, placement) and protect those elements. Test whether more visibility lifts results further.
Attention trap
An attention trap pulls many eyes but few shoppers add it to the cart.
- Why is it called this? The shelf draws attention to the product, but the attention does not turn into purchases.
- How RealEye selects this product: The product with the largest positive gap of VAI Reach minus Purchase ratio. Its VAI Reach must be above zero.
- Example on a real shelf: A product with 60% VAI Reach and 3% Purchase ratio is selected over one with 30% VAI Reach and 2% Purchase ratio.
- What action to take: Check the pack message, price cue and call to action. Attention is already there, so the gap is usually in the message or the price.
Impulse King
The Impulse King is picked up fastest after it is first seen. It turns a glance into an action with the least delay.
- Why is it called this? It has the shortest time from first look to pickup.
- How RealEye selects this product: The product with the lowest average time from first seeing it to picking it up.
- Example on a real shelf: Product B is picked up on average 1.8 seconds after it is seen, and no other product is faster. Product B is the Impulse King.
- What action to take: Keep the visual cues that make the product easy to spot and pick up, and reuse them on other packs.
Obvious choice
The obvious choice is the product that buyers most often pick up first. It is the default choice on the shelf.
- Why is it called this? Shoppers reach for it first and then buy it.
- How RealEye selects this product: Among participants whose first pickup ended in a purchase, the product picked up first most often.
- Example on a real shelf: If 9 of 20 buyers picked up product C first, product C is the obvious choice.
- What action to take: Use it as the reference for what shoppers expect. Keep its packaging and placement consistent with the category standard.
Shelf blind spot
A shelf blind spot is a product that shoppers' eyes skip. Even a good product cannot sell if nobody looks at it.
- Why is it called this? It has the lowest attention ratio on the shelf.
- How RealEye selects this product: The product with the lowest attention ratio on the shelf.
- Example on a real shelf: A product with a 4% attention ratio is selected over one with 12%.
- What action to take: Review placement first (eye level, neighbours, shelf edge). Then check whether the pack colour and contrast stand out.
Negative choice
The negative choice is picked up first often, but then put back. It creates interest that does not turn into a sale.
- Why is it called this? Shoppers pick it up first, but they do not buy it.
- How RealEye selects this product: Among participants whose first pickup ended without a purchase, the product picked up first most often.
- Example on a real shelf: If 7 of 20 non-buyers picked up product D first and put it back, product D is the negative choice.
- What action to take: Look at the price, claims and pack information. Something in the detail is making shoppers reconsider.
Worst performer
The worst performer has the lowest composite Score on the shelf.
- Why is it called this? It ranks last on the composite Score.
- How RealEye selects this product: The last product when all products are sorted by Score, using the same tie-breakers as the podium.
- Example on a real shelf: If the lowest Score on the shelf is 4.3, that product is the worst performer.
- What action to take: Start with its lowest input (Purchase ratio, Pickup ratio or Measured VAI). Decide whether the placement or the pack needs fixing.
AI Pack Winner
The AI Pack Winner is the product that the AI pack analysis expects to draw the largest share of attention. It is a prediction, not a measurement.
- Why is it called this? It has the highest Predicted CAS on the shelf.
- How RealEye selects this product: The product with the highest Predicted CAS among the products enriched with AI prediction. The card shows Not enough data yet when no product qualifies.
- Example on a real shelf: With products E (CAS 41) and F (CAS 22) analysed together, product E is the AI Pack Winner.
- What action to take: Compare the prediction with the Measured VAI. Use the AI winner to shortlist pack variants, then confirm the result with a real study.
Content: Shelf Performance, Shopper Funnel and Product Leaderboard
The lower part of the report summarises the whole shelf. The sections below describe each element.
Shelf performance benchmarks
Five summary cards show the shelf average for each metric:
- Avg. Score: the mean composite Score across all products.
- Avg. Measured VAI: the mean Measured VAI across all products.
- Avg. Pickup ratio: the mean Pickup ratio across all products.
- Avg. Purchase ratio: the mean Purchase ratio across all products.
- Avg. Shopping time: the mean shopping time for the study, shown in seconds.
Use the averages to judge whether a product is above or below the shelf norm.
Shopper funnel
The shopper funnel has three stages:
- Viewed shelf: participants who looked at the shelf.
- Picked up product: participants who picked up a product.
- Added to cart: participants who added a product to the cart.
The funnel shows where shoppers drop out. A large drop between the first and second stage points to a visibility problem. A large drop between the second and third points to a problem with the pack or price.
Interactive shelf map
The interactive shelf map shows the shelf image with each product's position. Select a product on the map to open its preview. Use the map to check whether position on the shelf matches the attention and purchase results.
Product leaderboard
The product leaderboard lists the products in Score order, using the tie-breakers described in the methodology. Each row shows the product's metrics and has a Preview button.
Product preview modal
The product preview modal opens from the shelf map or from a leaderboard row. It shows the product's pack image and, when available, the AI-predicted attention heatmap for that pack. Use it to check the pack that participants saw.

